V tomto článku se na příkladech dozvíte o různých uživatelsky definovaných funkcích, které přijímají vstupy různých typů a vracejí výstup.
V předchozím článku Swift Functions jsme se dozvěděli o funkcích. Nyní se podíváme na různé způsoby a typy, jak můžeme vytvořit funkci ve Swiftu, tj. Zpracování vstupu a výstupu ve funkci.
Funkce bez parametru a bez návratové hodnoty
Tyto typy funkcí neberou žádnou vstupní a návratovou hodnotu.
func funcname () (// příkazy) NEBO func funcname () -> () (// příkazy) NEBO func funcname () -> Void (// příkazy)
Všechny výše uvedené syntaxe jsou platné k vytvoření funkce, která nebere žádné parametry a nevrací hodnotu.
Výše uvedená syntaxe func funcname() -> ()
je také ekvivalentní, func funcname() -> Void
protože Void
je pouze typealias of ()
. Můžete navštívit Swift Typealias a dozvědět se více.
Příklad 1: Žádné parametry předány a žádná návratová hodnota
func greetUser() ( print("Good Morning!") ) greetUser()
Když spustíte výše uvedený program, výstup bude:
Dobré ráno!
Funkce bez parametru, ale s návratovou hodnotou
Tyto typy funkcí neberou žádné vstupní parametry, ale vracejí hodnotu. Chcete-li přidat návratový typ, musíte přidat arrow ( ->
) a návratový typ.
func funcname () -> ReturnType (// návratová hodnota příkazů)
Příklad 2: Žádné parametry předány, ale návratová hodnota
func greetUser() -> String ( return "Good Morning!" ) let msg = greetUser() print(msg)
Když spustíte výše uvedený program, výstup bude:
Dobré ráno!
Ve výše uvedeném programu jste definovali návratový typ, který má být String
. Nyní musí příkaz vrátit řetězec z příkazu uvnitř funkce, jinak se zobrazí chyba.
return
klíčové slovo přenáší řízení programu z těla funkce do volání funkce. Pokud potřebujete vrátit hodnotu z funkce, přidejte hodnotu za return
klíčové slovo.
return "Good Morning!"
příkaz vrací hodnotu typu String
z funkce. Typ návratnosti a hodnota se musí shodovat.
Návratovou hodnotu můžete také přiřadit proměnné nebo konstantě. let msg =
přiřadí návratovou hodnotu konstantní zprávě. Takže výpisu print(msg)
výstupů Dobré ráno! v konzole.
Pokud chcete tuto hodnotu zanedbat, můžete jednoduše použít _
jako let _ =
.
Funkce s parametrem, ale bez návratové hodnoty
K převzetí vstupu do funkce se používají parametry. Parametr obsahuje název parametru a typ následovaný dvojtečkou ( :
). Tyto typy funkcí přebírají vstupní parametr, ale nevracejí hodnotu.
func funcname (parameterName: Type) (// příkazy)
Příklad 3: Parametry předány, ale žádná návratová hodnota
func greetUser(msg:String) ( print(msg) ) greetUser(msg: "Good Morning!")
Když spustíte výše uvedený program, výstup bude:
Dobré ráno!
Ve výše uvedeném programu přijímá funkce jediný parametr typu String
. Parametr lze použít pouze uvnitř funkce. msg je název parametru.
Funkci můžete zavolat tak, že jí předáte řetězcovou hodnotu s názvem parametru jako greetUser(msg: "Good Morning!")
. Název parametru msg je viditelný pouze uvnitř funkce greetUser()
.
Z výpisu proto print(msg)
vychází Dobré ráno! v konzole.
Funkce s parametrem a návratovou hodnotou
Tyto typy funkcí přebírají parametry a také vracejí hodnotu.
func funcname (parameterName: Type) -> ReturnType (// příkazy)
Příklad 4: Předané parametry a vrací hodnotu
func greetUser(name:String) -> String ( return "Good Morning! " + name ) let msg = greetUser(name: "Jack") print(msg)
Když spustíte výše uvedený program, výstup bude:
Dobré ráno! Zvedák
Ve výše uvedeném programu funkce přijímá jediný parametr typu String
a také vrací hodnotu Dobré ráno! Jack typu String
.
Funkce s více parametry a více návratovými hodnotami
Tyto typy funkcí přebírají více parametrů oddělených čárkami a také vracejí více hodnot. V Swiftu můžete vrátit více hodnot pomocí Tuples. Další informace najdete v Swift Tuples.
func funcname (parameterName: Type, parameterName2: Type,…) -> (ReturnType, ReturnType…) (// příkazy)
Příklad 5: Více předaných parametrů a vícenásobná návratová hodnota
func greetUser(name:String, age:Int) -> (String, Int) ( let msg = "Good Morning!" + name var userage = age if age < 0 ( userage = 0 ) return (msg, userage) ) let msg = greetUser(name: "Jack", age: -2) print(msg.0) print("You have (msg.1) coins left")
Když spustíte výše uvedený program, výstup bude:
Dobré ráno, Jacku, zbývá vám 0 mincí
Ve výše uvedeném programu funkce greetUser()
přijímá více parametrů typu String
a Int
. Funkce také vrací více hodnot jako n-tici typu String
a Int
.
Pro přístup ke každé návratové hodnotě používáme indexové pozice 0, 1, … Tady jsme použili msg.0 pro přístup k Good Morning! Jack a msg.1 pro přístup k 0 .
Použití indexových pozic může být občas neintuitivní a nečitelné. Můžeme tento problém elegantně vyřešit pojmenováním návratových hodnot. Výše uvedený program lze přepsat také níže.
Example 6: Multiple return values with name
func greetUser(name:String, coins:Int) -> (name:String, coins:Int) ( let msg = "Good Morning!" + name var userCoins = coins if coins < 0 ( userCoins = 0 ) return (msg, userCoins) ) let msg = greetUser(name: "Jack",coins: -2) print(msg.name) print("You have (msg.coins) coins left")
In this program, the return type is of tuple that contains the variable name with the type. The main advantage of this is you can access the result using the variable name as msg.name and msg.coins instead of msg.0 and msg.1.
Function with argument label
When you define a function that accepts inputs, you can define the input name with the help of parameter name. However, there is another type of name which you can give along with the parameter name, known as argument label.
The use of argument labels allow a function to be called in an expressive way, sentence-like manner, while still providing a function body that is readable and clear in intent.
Each function parameter has both an argument label and a parameter name. By default, parameters use their parameter name as their argument label. But, if you explicitly define the argument name, the argument label is used when calling the function.
The syntax of function with argument label is
func funcname(argumentLabel parameterName:Type)-> Return Type ( //statements )
Let's see this in example below.
Example 7: Function without argument label
func sum(a:Int, b:Int) -> Int ( return a + b ) let result = sum(a: 2, b: 3) print("The sum is (result)")
When you run the above program, the output will be:
The sum is 5
In the above example, we have not specified the argument label, so it takes default parameter name a and bas the argument label while calling the function.
You may notice the function call is not expressive/sentence when calling the function. You may think it can be made more expressive as English if you could make the function call as:
let result = sum(of: 2, and: 3)
Now let's change the function as:
Example 8: Function with better function call but not as parameter names
func sum(of:Int, and:Int) -> Int ( return of + and ) let result = sum(of: 2, and: 3) print("The sum is (result)")
Now the method call is expressive. However, now we have to use the parameter name of & and in return of + and
to find the sum of two numbers. Now, this makes the function body unreadable. Use of a and b instead of of&and would make more sense inside the function body.
For this purpose we have to explicitly define argument label as:
Example 9: Function with argument labels
func sum(of a :Int, and b:Int) -> Int ( return a + b ) let result = sum(of: 2, and: 3) print("The sum is (result)")
In the above program, the function accepts two parameter of type Int
. The function call uses the argument label of & and which makes sense while calling the function as sum(of: 2, and: 3)
instead of sum(a: 2, b: 3)
.
Also, the function body uses the parameter name a and b instead of of & and which also makes more sense while applying operations.
You can also omit the argument label by writing a _
before the parameter name.
func sum(_ a :Int, _ b:Int) -> Int ( return a + b ) let result = sum(2, 3) print("The sum is (result)")
Function with default parameter values
You can give default values for any parameter in a function by assigning a value to the parameter after that parameter's type. Giving a default parameter allows you to neglect the parameter while calling the function.
If you do not pass value to the parameter while calling the function, its default value is used. However, if you explicitly pass a value to the parameter while calling, the specified value is used.
func funcname(parameterName:Type = value) -> Return Type ( //statements )
Example 10: Function with default parameter values
func sum(of a :Int = 7, and b:Int = 8) -> Int ( return a + b ) let result1 = sum(of: 2, and: 3) print("The sum is (result1)") let result2 = sum(of: 2) print("The sum is (result2)") let result3 = sum(and: 2) print("The sum is (result3)") let result4 = sum() print("The sum is (result4)")
When you run the above program, the output will be:
The sum is 5 The sum is 10 The sum is 9 The sum is 15
In the above program, the function sum(of a :Int = 7 , and b:Int = 8) -> Int
accepts two parameter of type Int
but also specifies the default value of parameter a = 7
and b = 8.
If you pass value as a parameter in the function call as sum(of: 2, and: 3)
then 2 and 3 is used instead of parameter default value.
But if you don't pass the parameter value as sum()
, then default value 7 and 8 are used as the parameter value.
Function with variadic parameters
A variadic parameter can accept zero or more values of a specific type. You can specify variadic parameter by inserting three period characters (… ) after the parameter's type name.
You usually use a variadic parameter when you need to pass a varying number of input values to the parameter when the function is called. For example, a list of numbers, a list of alphabets, etc.
The syntax of function with variadic parameters is:
func funcname(parameterName:Type… ) -> Return Type ( //statements )
Example 11: Function with variadic parameters
func sum(of numbers:Int… ) ( var result = 0 for num in numbers ( result += num ) print("The sum of numbers is (result)") ) sum(of: 1, 2, 3, 4, 5, 6, 7, 8)
In the above program, the function sum(of numbers:Int… )
accepts a variadic parameter of type Int
. A variadic parameter can accept multiple values separated by comma as sum(of: 1, 2, 3, 4, 5, 6, 7, 8)
.
The values 1, 2, 3, 4, 5, 6, 7, 8 passed as a variadic parameter are made available within the function's body as an array of the Int
type. Therefore, we can apply for-in
loop in the value as for num in numbers
.
When you run the above program, the output will be:
The sum of numbers is 36
Note: Swift built in print()
function also accepts variadic parameter of type Any
.
Any
represents to any data type in Swift e.g. Int
, Float
, Double
,String
etc.
Function with in-out parameters
When you define the function parameter, the function parameters cannot be modified inside the body. So they are constants by default. Let's see this in example:
func process(name:String) ( if name == ""( name = "guest" ) )
The above program results a compile-time error because you cannot change the value of a parameter.
If you want a function to modify a parameter's value, you need to define the parameter as in-out parameter. You write an in-out parameter by placing the inout
keyword right before a parameter's type.
Behind the scenes, an in-out parameter has a value that is passed into the function, is modified by the function, and is passed back out of the function to replace the original value. Therefore the value passed in the function call cannot be a constant. You must declare it as a variable.
The syntax of function with inout parameter is:
func funcname(parameterName:inout Type) -> Return Type ( //statements )
Example 12: Function with in out parameter
func process(name:inout String) ( if name == ""( name = "guest" ) ) var userName = "" process(name: &userName) print(userName)
When you run the above program, the output will be:
guest
In the above program, we have declared a function that accepts inout
parameter name so that the parameter can be changed/altered inside the body of the function.
You must use ampersand (&)
sign directly before a variable's name when you pass argument to an in-out parameter so that it can be modified by the function.